Power On/Off; Turning On The Power; Turning Off The Power - InFocus IN5132 User Manual

Power on/off

Power on/off

Turning on the power

1.
Make sure the power cord is firmly and
correctly connected to the projector and
the outlet.
2.
Make sure the POWER indicator is
steady orange (115). Then remove the
lens cover.
3.
Press the STANDBY/ON button on the
projector or the ON button on the remote
control.The projection lamp will light up and POWER indicator will begin
blinking green. When the power is completely on, the indicator will stop
blinking and become steady green (115).
To display the picture, select an input signal according to the section Selecting an
input signal (26).

Turning off the power

1.
Press the STANDBY/ON button on the projector or the STANDBY button on
the remote control.
The message "Power off?" will appear on the screen for about 5 seconds.
2.
Press the STANDBY/ON or STANDBY button again while the message is
displayed.
The projector lamp will go off, and the POWER indicator will begin blinking
orange. The POWER indicator will stop blinking and become steady orange
when the lamp cooling is complete (115).
3.
After the POWER indicator turns steady orange, attach the lens cover.
After turning the projector off, do not turn the projector on again for at least 10
minutes. Do not turn the projector off immediately after turning it on. Doing so can
cause the lamp to malfunction and shorten the lifetime of lamp or other parts.
WARNING
Do not look into the projector lens or look inside of the projector through any of
the projector's openings.
►Do not touch around the lamp cover or the exhaust vents during use or just
after use, because they are too hot.
NOTE
• Turn the power on/off in the right order. Power the projector on before
other connected devices.
• This projector can be turned on/off automatically. Refer to the DIRECT POWER
ON (66) and AUTO POWER OFF (66) items of the OPTION menu.
24
►A strong light is emitted when the projector's power is on.
POWER indicator
STANDBY button
ON button
STANDBY/ON button