Connecting A Computer Source; Vga Connection; Connecting Power; Optional Computer Connections - InFocus sp1080 User Manual

Table of Contents

Advertisement

Connecting a computer source

VGA connection

Connect one end of the provided computer cable to the Computer 1 connector
on the projector and the other to the VGA connector on your computer. If you
are using a desktop computer, you will need to disconnect the monitor cable from
the computer's video port first.
HDMI connection
HDMI is a standard, uncompressed, all-digital audio/video interface. HDMI
provides an interface between sources, such as set-top boxes, DVD players, and
receivers and your projector. Plug an HDMI cable into the video-out connector on
the video device and into the HDMI connector on the projector.

Connecting power

Connect the black power cord to the Power connector on the rear of the
projector and to your electrical outlet. If the Power Saving Mode feature is off, the
Power LED on the Status Indicator Panel (page 11) blinks green. If the Power
Saving Mode feature is on, the Power LED is steady amber. By default, this feature
is off. You can change the setting, see page 28. NOTE: Always use the power cord
that shipped with the projector.

Optional computer connections

To get sound from the projector, connect an audio cable (optional cable, not
included) to your computer and to the Audio 1/Audio 2 connector on the
projector. You may also need an adapter.
connect VGA cable
connect HDMI
connect power
connect audio cable
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents