Note: This mode is used only by maintenance personnel and it should not be released to the end-users.
To enter into the system maintenance mode, turn the POWER switch on while holding the
Recover key down.
Function
There are six functions as follows:
Page count display
Loop test
Page count printing enable/disable
EEPROM reset
Rolling ASCII continues printing
Detailed descriptions of these functions are provided in Appendix D, DIAGNOSTICS TEST.
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
Service Manual - OKIPAGE10i
Chapter 4 Adjustment
Page: 54