Page: 152
Service Manual - OKIPAGE10i
Chapter F High Capacity Second Paper Feeder M/M
(1) Follow up to step (3) of 3.3.1 and remove the hopping frame assy.
(2) Remove the screw (1) and remove the earth plate (2). Remove the sensor lever (7) and remove the
ground plate (6). Remove the gear (3) and remove the metal bush (5) and hopping roller shaft assy (4).
(3) Remove the E-ring (11) and remove the one-way clutch gear (12) on the right side of the feed roller
(10).
Note: The metal bush (13) also comes off. Be careful not to lose it.
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)