Oki OKIPAGE 10i Service Manual page 63

Page: 35
Service Manual - OKIPAGE10i
Chapter 3 Parts Replacement
(1) Remove the upper cover assy (see 3.3.1).
(2) Remove the operator panel assy (see 3.3.4).
(3) Remove the face up stacker assy (see 3.3.8).
(4) Remove the lower base unit (see 3.3.5).
(5) Remove the motor assy (see 3.3.10).
(6) With the lower base unit (1) standing on its side, remove the one-way clutch gear (2) and the bearing
(A) (3).
(7) Remove the hopping roller shaft assy (4) (the bearing (B) (5) comes off, so be careful not to lose it).