Oki OKIPAGE 10i Service Manual page 181

This Multi-Purpose Feeder is installed on the front section of the printer, and it supplies paper
automatically through the operation of pulse motor, which is driven by signals sent from the printer.
The main functions are the followings:


Paper that can be used:
[Paper Types]


Standard paper: Xerox 4200 (20-lb)


Special paper: OHP sheets (for PPC), label sheets (PPC sheets). * Not guaranteed for OHP sheets
with attachments on the edge or reverse side.


Cut sheet size: Letter, Executive, A4, A5, B5, A6
Special size: Width: 87 to 216mm
Length: 148 to 297mm
[Weight and Thickness]


16-lb to 32-lb (60~128 g/m


For labels and OHP Sheets: Label sheets: 0.1 to 0.15mm; OHP sheets: 0.08 to 0.11mm
* When using sheets which exceed 24-lb, make sure that the paper exits through the face-up route.
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
Service Manual - OKIPAGE10i
Chapter E Multi-Purpose Feeder Maintenance
2
)
Page: 115