Oki OKIPAGE 10i Service Manual page 25

Sensor Function
Inlet sensor 1 Detects the leading part of the paper and gives
the monitor timing for switching from hopping
operation to feeding operation. Monitors paper
feeding situation and paper size based on the
paper arrival time and running time.
Inlet sensor 2 Detects the paper width
Paper sensor Detects the leading portion of the paper. Monitors
the paper feeding situation.
Outlet sensor Monitors the paper feeding and size according to
the time of arrival to and leaving the past the
sensor.
Paper and sensor Detects the end of the paper.
Toner low sensor Detects the lack of toner.
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
Sensing state
ON: Paper exists.
OFF: No paper exists.
ON: A4 or larger
OFF: Small than A4
ON: Paper exists.
OFF: No paper exists.
ON: Paper exists.
OFF: No paper exists.
ON: Paper exits.
OFF: No paper exists.
- - - - -