(1) Press the knobs on left and right sides and open the stacker cover assy (1).
(2) Open the hook section on the left side of the stacker cover and remove the LED head (2).
Note:
Be sure not to touch directly or push on the SLA part of the LED head.
Do not remove the LED cable (3) from the connector.
Remove connector (4) and cable (3) together as an assembly from the LED head.
After mounting the new LED head and reinstalling the cable, set drive time of the LED head according
to the marking on the LED head (see 4.2.1).
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
Service Manual - OKIPAGE10i
Chapter 3 Parts Replacement
Page: 27