Oki OKIPAGE 10i Service Manual page 117

Category LCD status
message
Daily status
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
Service Manual - OKIPAGE10i
Chapter 6 Troubleshooting Procedures
Problem or status
Message displayed to indicate that in
order reflect the changes in the menu to
the editing environment, RESET must e
executed. This message is displayed
when the printer is unable to conduct
automatic reset due to the existence of
temporary attributes such as
DLL/Macro/user Pattern/user Symbol
Set.
Indicates data is downloading to flash
memory.
Indicates that an error occurred during
downloading to flash memory.
The demo page is bring printed.
Ready LED on: Executed by command
entry.
Ready LED blinking: Executed by key
operation.
When the number of copies being
printed is two or more, the number of
copies being printed is displayed.
This message is displayed together with
another message on the first line.
nnn: Current page
mmm: Total page
PostScript mode only.
This message is displayed when ON
LINE key is pressed while the printer is
processing a job, if the JOB RESET in
menu is off, the printer goes off-line after
completing the job.
This message is displayed when the
printer is performing the cleaning print.
Remedy
Normal operation.
Page: 77