Oki OKIPAGE 10i Service Manual page 80

Page: 48
Service Manual - OKIPAGE10i
Chapter 3 Parts Replacement
(1) Remove the paper cassette.
(2) Remove the upper cover assy (see 3.3.1).
(3) Remove the lower base unit (see 3.3.5).
(4) Remove the M5B-PCB (see 3.3.21).
(5) Remove the transformer (see 3.3.22).
(6) Remove the power supply/sensor board (see 3.3.23).
(7) Remove two screws (1), and remove the guide rails (2).
(8) Remove the screw (3), and remove the cassette guide L (9) by shifting it in the direction of the arrow
as shown below.
(9) Remove cassette lock lever (4) and torsion spring (5).
(10) Remove cassette lock lever spring (8) then remove the sheet link (L) (6) and Pull block (7).