Page: 150
Service Manual - OKIPAGE10i
Chapter F High Capacity Second Paper Feeder M/M
(1) Turn the printer power switch off, pull out the AC cord from the outlet. Remove the printer off High
Capacity Second Paper Feeder.
(2) Take the paper cassette assy (1) out of High Capacity Second Paper Feeder.
(3) Remove six screws (2) and remove the upper plate (3). Remove two screws (5) and remove the
hopping frame assy (6).
(4) Remove the front cover assy (4) off the guide boss on the guide L (2nd) assy (7) by bending the guide
L (2nd) assy (7) in the direction of arrow shown in the magnified view below.
(5) Pull the sheet guide assy (8) in the direction of arrow (a) and also push in the direction of arrow (b) to
unlock the notch, and bring the sheet guide assy (8) in the direction of arrow (c) to remove the sheet guide
assy (8).
(6) Remove three screws (9) which are holding the guide R (2nd) assy (10) to the bottom plate (11).
Remove the screw (12) which is keeping the rear cover (13) and guide R (2nd) assy (10). Remove the