If the problems cannot be corrected by using the LCD status message/problem list, follow the
troubleshooting flowcharts given here.
No.
Trouble
1.
The printer does not work normally after the power is turned
on.
2.
Jam alarm
- Paper input jam
- Paper feed jam
- Paper exit jam
3.
Paper size error
4.
Fusing unit error
5.
SSIO (Synchronous Serial Input/Output) error I/F timeout (no
response) between the printer and an optional tray (High
Capacity Second Paper Feeder, Power Envelope Feeder).
6.
Fan error
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
Service Manual - OKIPAGE10i
Chapter 6 Troubleshooting Procedures
Flowchart number
(1)
(3)
(4)
(5)
(6)
Page: 80