Xerox Document Centre 555 Setup Manual page 20

Authentication Set Up on the DC 555/545/535
NOTE: If you do not use either type of authentication skip this section.
1. On the DC 555/545/535 control panel, press Access
2. Use the keypad, to enter 1111 or the current password. Press Enter on the touch
screen.
3. On the touch screen, press Go to Tools. Wait for the screen to refresh.
4. On the touch screen:
a. Press More until Service Access Control is displayed.
b. Press Service Access Control. The Authentication screen is displayed.
c. Verify that Network Authenticated Access is enabled and/or press Guest Access.
If you press Guest Access, follow the instructions on the screen to set up a guest
passcode.
d. When complete, press Next.
e. Press Save.
5. Press Exit Tools on the touch screen.
Page 18
Simple Scan to Email Setup Guide
.
May 2004