®
Xerox
WorkCentre™ 5945/5955 Multifunction Printer
How to make a copy
Control panel
1
3
2
Document feeder option
1.
Load your documents face up in the document feeder input tray. Adjust the guide to just touch the documents.
Or
Lift up the document feeder. Place the document face down onto the document glass and register it to the arrow at the
top left corner. Close the document feeder.
2.
Press the
button on the control panel to cancel any previous programming selections.
Clear All
3.
Press the
Services Home
4.
Select the
Copy
button on the touch screen.
5.
If required, select the
Copy
6.
Select any options required.
7.
Enter the number of prints required using the numeric keypad on the control panel.
8.
Press the
Start
button on the control panel to scan the original.
©2014 Xerox Corporation. All rights reserved. Xerox
BR7341
Or
button.
tab. This is usually the active tab when the Copy service opens.
®
®
and Xerox and Design
are trademarks of Xerox Corporation in the United States and/or other countries.
5
4
Document glass option
Services Home
1
Job Status
2
Touch Screen
3
Start
4
6
Clear All
5
Stop
6
For more information
Please refer to the user guide -
available at
http://www.support.xerox.com