Xerox Document Centre 555 Setup Manual page 14

3. If your network includes an alternate LDAP server and you wish to indicate it as a
backup for access to your internal address book, enter item 7 recorded in the
"Installation Information" section earlier in this document.
4. In the Optional Information section, enter any or all of the following:
a. Search Directory Root. To restrict the search to a designated section of the LDAP
structure, enter a directory root where the search begins.
b. Login Name. The LDAP server login name (case sensitive), if required.
c. Password and Retype password. The password that corresponds to the LDAP
server login name (case sensitive).
d. Maximum Number of Search Results.
e. Search Timeout. Select Wait LDAP Server Limit to use the server's timeout setting
or select Wait [5-100] seconds.
5. Select the Search Name Order you wish to use, Common Name or Surname and
Given Name.
NOTE: This selection reflects the way data is entered in your LDAP directory. Lotus
Domino and Netscape generally use Surname and Given Name.
6. Click Apply New Settings.
7. When prompted, enter admin (lower case) in the User Name field. Enter 1111 or the
current password in the Password field and click OK.
8. For first time setup up you will automatically receive a popup window to enter the LDAP
directory. Otherwise, Select the Edit LDAP Mappings option.
9. Enter a name you know exists in the LDAP directory.
10. Choose the type of LDAP server used.
NOTE: If the server type you used is not in the list, instead of Other, select Netscape.
11. Select Search.
12. Examine the list of LDAP attributes displayed based on the name entered. The terms in
the left column represent searched items for the LDAP fields listed in the middle
column. Search results appear in the right column. If any of the values are not correct,
use the dropdown boxes in the middle to choose an alternate LDAP field for the DC
555/545/535 to use when performing a search. When the dropdown menus are correct,
select the Test button. Continue this process until all values are as desired. You can
also enter a new name if the LDAP search yields no results. You can choose No
Mappings Selected for any item without a corresponding LDAP field.
Page 12
Simple Scan to Email Setup Guide May 2004