Xerox Document Centre 555 Setup Manual page 12

9. Select IP Address or Host Name, and enter the IP address or host name of the SMTP
server you recorded for item 2 in the "Installation Information" section earlier in this
document.
10. See item 4 recorded in the "Installation Information" section earlier in this document. If
you entered a port other than 25, change the default to match the port number you
recorded.
11. Enter the DC 555/545/535 email address in this field: DC 555/545/535 E-mail Address.
See item 4 recorded in the "Installation Information" section earlier in this document.
12. Enter the Maximum Message Size. This value represents the largest message size
including an attachment. If a job exceeds the maximum message size, it splits into jobs
with smaller attachments. A typical value is 10240 KB.
13. Enter the Maximum Number of Fragments. This value represents the greatest number
of times the DC 555/545/535 can split a job into fragments. If you don't want the job to
split at all, enter 1.
14. Enter the Total Job Size. This value represents the largest job or job fragment allowed
on the network. The maximum allowed by the DC 555/545/535 is 300MB.
15. Click Apply New Settings.
16. When prompted, enter admin (lower case) in the User Name field. Enter 1111 or the
current password in the Password field and click OK.
You have now completed the steps for basic email setup. You will need to
reboot the DC 555/545/535 for all of the settings to apply. For additional
options you may proceed to the following sections before re-booting:
Page 10
Simple Scan to Email Setup Guide May 2004