Xerox Document Centre 555 Setup Manual page 11

f. Press Save.
g. Press Close three times.
5. To enable Scan to Email, on the touch screen:
a. Press More.
b. Press Configuration and Setup.
c. When the warning screen displays, press Close.
d. Press Optional Services.
e. Press Scan to Email.
f. Press Enable.
g. Press Save.
6. Press Exit Tools.
Verify the touch screen displays the E-mail button.
Use CentreWare Internet Services to Set Up TCP/IP Domain and SMTP
1. At a workstation on the network, open the Internet browser.
2. Enter the IP address of the DC 555/545/535 you recorded for item 2 in the "Installation
Information" section earlier in this document, and press Enter on the keyboard.
When the DC 555/545/535's home page is displayed, select the Properties tab. Expand
the Connectivity and Protocols folders and select TCP/IP.
3. Enter the Domain Name in the Domain Name box.
NOTE: If the DC 555/545/535 is set up for dynamic addressing, the Domain Name will
not be accessible. If you need to change it, click on Static from the IP Address
Resolution pull down list and enter the Domain Name. You will then need to return this
setting to it original selection.
4. If you are going to use the Hostname for the SMTP server, you will need to enter the
Preferred DNS server IP address at this time
5. Click on Apply New Settings.
6. When prompted, enter admin (lower case) in the User Name field. Enter 1111 or the
current password in the Password field.
7. Click OK.
8. Select the SMTP Server.
May 2004 Simple Scan to Email Setup Guide Page 9