Using An Alternate Mount Or Stand - Wacom DTK-2400 User Manual

USING AN ALTERNATE MOUNT OR STAND

If using Cintiq in an installation that requires the use of an alternate mounting platform, you can remove the
Cintiq display stand from the unit and mount the pen display onto any stand or mounting platform
conforming to the VESA MIS-E 100/200 (6 screw) standard.
Notes:
Required mounting screws are 4 mm wide with a 0.7 mm pitch (M4), with a screw clearance depth of
17 mm. Exceeding the clearance depth of 17 mm will damage the internal components of the pen
display. These screws were provided with your product accessories.
The combined weight of this product (pen display and display stand) is approximately 29 kg (64 lbs).
Any table or platform on which this product is installed must be able to support the combined weight
of the Cintiq interactive pen display and Cintiq display stand.
The pen display portion of this product weighs 16 kg (35.2 lbs). Any platform or fixture on which the
pen display alone is mounted must be able to support the weight of the Cintiq interactive pen
display.
To remove the pen display from the display stand:
1. Turn off your computer and power off the pen display.
2. See removing Cintiq from the display
To attach the pen display to a VESA mount:
1. Review the instructions that came with your stand or
mounting platform. Be sure you understand them, and
follow all instructions carefully. Pay attention to any
cautions or other safety information.
2. Locate the provided VESA mount spacers to match the
lower three screw positions on the back of Cintiq.
3. Using the appropriate screws for your mounting platform
and as indicated above, firmly attach the pen display to
the platform.
4. As applicable, attach the appropriate cabling between
the pen display and your computer. Be sure to replace
the pen display cable connector covers.
To remove the pen display from a VESA stand, reverse the
above procedure. Then see
stand.
Warning
When attaching the pen display onto an alternate mounting platform, be sure to follow all instructions in the
documentation supplied by the platform manufacturer. If improperly installed, the unit could fall, resulting
in physical injury or damage to the unit.
Contents Index
stand.
mounting Cintiq on the display
Contents Index
98
Spacers
98