Wacom DTK-2400 User Manual page 93

2. Prepare the pen display. Adjust height and incline so that both display support arms are in their upright,
locked position. The pen display incline should be approximately 45 degrees to the stand base. As a
unit, carefully pivot Cintiq and the display stand on the stand base edge so the display can be placed
face down on a soft cloth or other protective surface.
Carefully adjust the incline levers until the pen display screen lies flat on your work surface. This also
allows for access to the display support arm brackets. Correct placement will have the base of the
stand aligned on edge near the bottom of the pen display.
Warning
Do not allow the pen display to drop onto the work surface. Avoid catching your finger in the gaps of the
movable portions of the stand.
3. Ready the stand for removal. Remove the cable connector covers from the back of the pen display.
Disconnect the cables.
Contents Index
Contents Index
93
93