Erasing - Wacom DTK-2400 User Manual

FUNCTION NAME
M T ...
ODE OGGLE
E
RASE
S S
HOW ETTINGS
Contents Index
DESCRIPTION
Toggles between pen mode
monitor system, this enables you to use your pen to control the other monitors in
mouse mode.
When first setting a pen button to M
displayed where you can adjust the mouse acceleration and speed.
Sets the screen cursor tracking
speed when in mouse mode.
Sets the screen cursor acceleration
when in mouse mode.
Mouse mode settings can be accessed from a number of different locations within
the control panel. However, only one M
be made for each pen and application that you are customizing.
The mouse mode settings are independent of system settings. Changes you make
to these settings in the Wacom Tablet control panel do not affect similar system
settings. However, changes made to similar system settings may affect your pen
display settings.
Pen only. Sets a button so that when the button is pressed, the pen tip will act like
the eraser in applications that support the E
eraser. See erasing.
Activates (on your display screen) a diagram of the current ExpressKey, Touch
Ring, and pen settings. The current functions for each control are shown.
At the bottom of the diagram, click C
control panel and adjust settings as needed.
Dismiss the diagram by again pressing the ExpressKey to which this function is
assigned, or by clicking anywhere outside of the diagram.
Contents Index
and mouse mode. When using Cintiq on a multiple
T ..., the M
ODE OGGLE
A
OUSE CCELERATION
function. Default setting for the
RASE
S
HANGE ETTINGS
M dialog box is
OUSE ODE
and S setting can
PEED
... to open the Wacom Tablet
62
62