Button Functions - Wacom DTK-2400 User Manual

5. Check the hardware control buttons. See
control buttons.
6. Check the ExpressKeys. See
7. Check the Touch Rings. See
If you are still having problems, you may have a defective pen or pen display.
After testing, use the Wacom Tablet control panel to reconfigure your tablet and tools for any custom
settings you may originally have been using.
TESTING CONTROLS AND INPUT TOOLS
If the Grip Pen, or the Cintiq controls do not work as you expect, it is a good idea to first check the
assigned functions or reset them to their default conditions.
A quick way to return a pen to its default condition is to remove it from the control panel T
by selecting the pen and clicking on the T
back onto the display screen surface. The pen will be added back to the T
• Open the Wacom Tablet control panel and click on the A
click on the D
IAGNOSE
Cintiq pen display and pen. This information is used when testing Cintiq and your input tool.
• If more than one pen display or tablet is connected to your system, in the T
unit for which you are testing.
• Use the information shown in the D
Note: If a tool button is set to R
pressed. In this case you may want to change the button function before testing.
Testing the hardware control buttons
Testing the ExpressKeys
Testing the Touch Rings
Testing a pen
TESTING THE HARDWARE CONTROL BUTTONS
1. With the D
IAGNOSTICS
hardware control buttons located on the upper front of your interactive pen display. Be sure to select
the Cintiq unit you are testing from the T
2. Test the buttons by pressing them one at a time. Each time you press a button, its number is shown
next to the either the L
3. When you are done, click the
Contents Index
testing controls and input tools
testing controls and input tools
testing controls and input tools
list [ – ] button. After the pen has been removed, place it
OOL
... button. The D
IAGNOSTICS
IAGNOSTICS
M or O
ADIAL ENU
dialog box open, observe the T
ABLET
B or R
EFT UTTONS IGHT
button to exit the dialog box.
C
LOSE
Contents Index
and testing the
and testing the Touch
button. In the dialog box that appears,
BOUT
dialog box shows dynamic information about the
dialog box when testing your pen display and pen.
/R ..., that function will occur when the button is
PEN UN
I column as you test each of the three
ABLET NFO
I column.
NFO
B category.
UTTONS
and testing the hardware
ExpressKeys.
Rings.
list. Do this
OOL
list with its default settings.
OOL
I column select the
ABLET NFO
72
72