Testing The Expresskeys - Wacom DTK-2400 User Manual

TESTING THE EXPRESSKEYS

1. With the D
IAGNOSTICS
Be sure to select the Cintiq unit you are testing from the T
2. Test the keys by pressing them one at a time. Each time you press a key, its number is shown next to
either the L B
EFT UTTONS
3. When you are done, click the
Important: Some applications can override and control the ExpressKey functions. Consider closing
any open applications except the Wacom Tablet control panel when testing the ExpressKeys.
For details, see using applications integrated for tablet
TESTING THE TOUCH RINGS
1. With the D
IAGNOSTICS
Be sure to select the Cintiq unit you are testing from the T
2. Slide your finger around the entire circumference of each Touch Ring. A number is shown next to either
the L T or R
EFT OUCH
3. Press the Touch Ring mode buttons. Status LEDs show the active mode. As you press each button, an
overlay will appear briefly on your display screen to show the button function assignments. Within the
D dialog box, the button number is shown next to either the L
IAGNOSTICS
category, depending on which buttons group you are testing.
4. When you are done, click on the C
Important: Some applications can override and control the Touch Ring functions. Consider closing
any open applications except the Wacom Tablet control panel when testing the Touch Ring.
For details, see using applications integrated for tablet
Contents
dialog box open, observe the T
or R B
IGHT UTTONS
button to exit the dialog box.
C
LOSE
dialog box open, observe the T
T category, depending on which Touch Ring you are testing.
IGHT OUCH
button to exit the dialog box.
LOSE
Contents
Index
I
ABLET NFO
ABLET
category, depending on which keys group you are testing.
control.
I
ABLET NFO
ABLET
control.
Index
column as you test each ExpressKey.
I column.
NFO
column as you test each Touch Ring.
I column.
NFO
B or R
EFT UTTONS
73
B
IGHT UTTONS
73