Removing Cintiq From The Display Stand - Wacom DTK-2400 User Manual

Interactive pen display
Table of Contents

Advertisement

REMOVING CINTIQ FROM THE DISPLAY STAND

The Cintiq interactive pen display has been specifically designed for use when mounted on the Cintiq
display stand. However, there may be times when it will be necessary to remove the pen display from the
stand. For example, you may want to locate the pen display on a suitable VESA mounting arm.
See
using an alternate mount or
Important: Request assistance from another person when removing Cintiq from the stand. Cintiq is heavy.
Use care when working with or moving the unit.
To remove the pen display from the stand:
1. First disconnect all cables from between the display stand and your computer. Then move Cintiq to a
location with adequate space for disassembly.
Adjust height and incline
horizontally. Place all cables on top of the stand base and ensure they do not hang free. Tripping over loose
cables can cause physical damage or personal injury.
Request assistance from another person or persons. Each person should securely grasp the lower part of a
display support arm near the display stand base. With the other hand, grasp the base of the stand at the
front corner. Using care, lift and carefully move this product while supporting the base of the stand.
Important: The assembly is heavy. Do not attempt to lift Cintiq by yourself. Each person should use
both hands to securely grasp the product. Grasp the stand base at the corner areas to avoid any sharp
edging. DO NOT lift the display unit itself, otherwise damage might occur to the LCD if it flexes during
movement. Also, the display unit does not have sufficient strength to support the load of the stand
hanging freely from it. Work together, and lift carefully.
Locate Cintiq on a desktop or other working surface that is flat, clean, and free of any moisture or oily film.
Taking care not to pinch your fingers, do this by first placing the rear half portion of the stand onto the table
surface. Then slide the stand fully into place so that it will not tip or fall.
When in place, use the incline levers to rotate the display back to a vertical position.
Contents
Index
stand.
so the display stand support arms are locked upright, with Cintiq positioned
Contents
Index
92
92

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cintiq 24hd dtk-2400

Table of Contents