Using An Alternate Mount Or Stand - Wacom DTF-510 Safety Instructions

Using an Alternate Mount or Stand

If you will be using the DTF-510U in an installation that requires the use of an alternate mounting platform, you
mount the DTF-510U onto a VESA conforming mount arm or stand.
DTF-510
A VESA mounting platform will require mount screws that are 4 mm wide with a 0.7 mm pitch (M4 Regular).
Exceeding the screw clearance depth of 15 mm will damage the DTF-510U internal components.
To remove the adjustable stand and attach the DTF-510U to a different mounting platform:
Turn off your computer and power off the DTF-510U. Then disconnect all cables from the unit.
Protect the display screen surface by spreading a soft cloth onto a flat table and placing the DTF-510U face
down on the cloth.
U s i n g t h e a p p r o p r i a t e s c r e w s f o r y o u r
mounting platform, firmly attach the DTF-510U
to the alternate mounting platform.
Rettach the cabling.
CAUTION
When attaching the DTF-510U onto
an alternate mounting platform,
be sure to follow all instructions
in the documentation supplied
by the platform manufacturer.
If improperly installed, the unit could
fall and be damaged.
DTE-510UEN.ind
DTF-510
DTF-510
DTF-510
DTF-510
DTF-510
13
DTF-510
03.4.9, 6:33 PM
DTF-510
13