Contents Index - Wacom DTK-2400 User Manual

POSITIONING
To position the screen cursor, move the pen slightly above
the Cintiq display screen without touching the screen
surface. Press the pen tip on the display screen to make a
selection.
Note: Calibrating the pen display
of the screen cursor with the pen tip. If the screen
cursor does not jump to a position near the pen tip
when you place the pen on the display screen, then
the pen display software driver may not be installed
or is not loading. Install the driver software if
necessary. Otherwise, see troubleshooting.
CLICKING
Tap the display screen once with the pen tip, or touch the pen to
the display screen with enough pressure to register a click.
Tip: Configure Windows to select when hovering the pen over
an icon and to launch the icon with a single click. To turn
on this feature, first open a folder.
Windows 7 and Vista: From the O
choose F
OLDER AND
tab select S
INGLE
Windows XP: From the T
F O
OLDER PTIONS
CLICK TO OPEN AN ITEM
Press the upper side switch
(when set to D
OUBLE
or quickly tap the display
screen twice in the same
place with the pen tip.
Double-clicking is easier
when using the pen
perpendicular to the pen
display screen.
Contents
ensures correct alignment
RGANIZE
S O
EARCH PTIONS
-
CLICK TO OPEN AN ITEM
pull-down menu choose
OOLS
.... From the G
ENERAL
(
POINT TO SELECT
C ),
LICK
Contents
Index
pull-down menu
. From the G
ENERAL
( ).
POINT TO SELECT
tab select S -
INGLE
).
Index
34
34