Using An Alternate Mount Or Stand - Wacom DTU-710 Safety Instructions

DTU-710 Component Functions

Using an Alternate Mount or Stand

If you will be using DTU-710 in an installation that requires the use of an alternate mounting
platform, you can remove the adjustable stand from DTU-710 and mount the pen display onto
a VESA conforming mount arm or stand.
A VESA mounting platform will require mount screws that are 4 mm wide with a 0.7 mm pitch
(M4 Regular). Exceeding the screw clearance depth of 15 mm will damage DTU-710 internal
components.
To remove the adjustable stand and attach DTU-710 to a different mounting platform:
Turn off your computer and power
off DTU-710. Then disconnect all
cables from DTU-710.
Protect the display screen surface by
spreading a soft cloth onto a flat table
and placing DTU-710 face down on
the cloth.
Remove the four screws and lift the
adjustable stand assembly away from
the body of DTU-710.
Using the appropriate screws for
your mounting platform, firmly attach
DTU-710 to the alternate mounting
platform.
Rettach the cabling.
CAUTION
When attaching DTU-710 onto an
alternate mounting platform, be
sure to follow all instructions in the
documentation supplied by the platform
manufacturer.
If improperly installed, the unit could fall
and be damaged.
12
DTU-710_EN.indd 12
unscrew
04.7.20 8:32:02 PM