Testing A Pen - Wacom DTK-2400 User Manual

TESTING A PEN

1. While observing the P
screen. A value for P
be displayed. Be sure to select the Cintiq unit you are testing from the T
2. Move your tool along the pen display screen surface. The X and Y D
the tool position.
3. Test your pen switches. The Cintiq status LED should light blue each time you click with the tool tip,
press the side switch, or press the tool eraser to the display screen.
• Press on the display screen surface with the tool tip. The S
should change. P
approximately 100% when full pressure is applied.
• Next, press the side switch without pressing the tip to the tablet. The S
change. For the Grip Pen, do this for both positions of the switch.
Pen
Airbrush
• Press the eraser to the display screen. The S
P should change from approximately 0% with no pressure applied to approximately 100%
RESSURE
when full pressure is applied.
• For the optional Airbrush, move the fingerwheel forward. The W
value of approximately 0 when the fingerwheel is all the way forward. Move the fingerwheel
backward. The W
way back.
4. Test tilt for the x-axis by moving the pen from a vertical position toward the right; the X T
change from approximately 0 to +60. Now move the tool to the left of vertical; the X T
change from approximately 0 to - 60.
5. Test the tilt for the y-axis by moving the pen from a vertical position toward the bottom of the tablet; the
Y T value should change from approximately 0 to +60. Now move the tool toward the top of the
ILT
tablet; the Y T value should change from approximately 0 to - 60.
ILT
6. For the optional Art Pen, test the rotation feature by placing the pen tip on the display screen surface
and slowing rotating the pen on its axis. The R
7. When you are done, click on the C
Contents Index
D I column, bring your pen within 5 mm (0.2 inch) of the display
OINTING EVICE NFO
, the D N
ROXIMITY EVICE
should change from approximately 0% with no pressure applied to
RESSURE
Tip = 1
Side switch (lower position) = 2
Side switch (upper position) = 3
Eraser = 1
Tip = 1
Side switch = 2
Eraser = 1
value should increase to approximately 1000 when the fingerwheel is all the
HEEL
button to exit the dialog box.
LOSE
Contents Index
, D T , and a D
AME EVICE YPE
WITCHES
state and P
WITCHES
value should change as you rotate the pen.
OTATION
S/N (serial number) should
EVICE
I column.
ABLET NFO
values should change to reflect
ATA
state and P
RESSURE
state should
WITCHES
value should change.
RESSURE
value should decrease to a
HEEL
ILT
value should
ILT
74
value
value should
74