Replacing The Pen Nib - Wacom DTK-2400 User Manual

REPLACING THE PEN NIB

The pen nib (tip) will wear with normal use. Excessive pressure will cause it to wear more quickly.
Replace the nib when it gets too short or develops a flat point.
1. Unscrew the pen stand base to access the nib removal tool and replacement nibs.
Replacement nibs
10 standard nibs
2. Clasp the old nib and pull it straight out of the pen. Use the nib removal tool, pair of tweezers,
needle-nosed pliers, or similar instrument.
3. Slide the end of the new nib straight into the barrel of the pen. Firmly push the nib until it stops.
Nib Replace when 1 mm
(0.04 inch) or less.
Warning
Choking hazard. Prevent children from swallowing the pen nib or side switch. The pen nib or side switch
may accidentally be pulled out if children are biting on them.
For replacement parts, see
Important: When not in use, place the pen in the pen stand or lay it flat on your desk. When the
optional Airbrush is not in use, lay it flat on your desk. To maintain the sensitivity of your input tools,
do not store them in a container where they will rest on their tip or eraser. Improper storage may
damage the pen tip pressure sensor(s).
Contents Index
Nib removal tool
ordering parts and accessories.
Contents Index
90
90