Mounting Cintiq On The Display Stand - Wacom DTK-2400 User Manual

MOUNTING CINTIQ ON THE DISPLAY STAND

Follow the below procedure to mount the interactive pen display on the display stand. For example, Cintiq
may have been mounted in a specialized location using a suitable VESA mounting arm and you now wish
to return the pen display to the display stand.
Important: Request assistance from another person when mounting Cintiq on the stand. Cintiq is
heavy. Use care when working with or moving the unit.
To mount the pen display on the stand:
1. Prepare the display stand. Carefully raise both display support arms to their upright, locked position.
2. Prepare the pen display. Place the pen display face down on a soft cloth or other protective surface.
Remove both cable connector covers from the pen display, if you have not already done so.
3. Ready the stand for attachment. Locate the base of the stand so the edge is aligned near the bottom of
the pen display.
4. Pivot the stand on its base edge. The connection cables port and release latch should rise above the
table surface. Continue pivoting the stand to lower the support arm brackets into the bracket mounts
located on the pen display.
Contents Index
Contents Index
95
95