Unpacking And Mounting Cintiq Onto The Stand - Wacom CLINIQ 21UX DTZ-2100 User Manual

Unpacking and Mounting Cintiq onto the Stand

1.Unpack the stand.
CAUTION
Before operate the Incline Adjustment Levers, please refer
to Using the Stand section on page 18. Do not operate the
incline adjustment levers when Cintiq is not mounted on the
stand or the stand's rear feet are lifted; the stand is spring-
loaded and may cause injury or damage if released without
the weight. Be careful to avoid catching your finger in the gap
of the movable portion of the closing stand.
2. Unpack the Cintiq main unit. Place the display unit face down on a flat, soft surface (such as on a cloth spread across a
desktop) and remove any packing materials.
3. Place the stand where the stand is stable. Cintiq will weigh 10 kg when the main unit is mounted.
4. Lift the main unit so the switches come on top. Then mount the main unit onto the stand as shown below.
5. Lock the main unit to the stand using the left and right lock brackets with screws; they mirror one another and the
arrows on the brackets point toward the center of the main unit.
Incline Adjustment Levers
CAUTION
Be sure to fix the main unit to the stand. Otherwise the stand can fall
from the main unit when moving Cintiq to a different location if Cintiq
is in landscape orientation; it may cause physical injury or damage to
the stand. If Cintiq is not fixed to the stand, when moving to a different
location Cintiq may unexpectedly rotate and fall from your hands. If
you have to move Cintiq to a different location when Cintiq is unfixed
to the stand, be sure to remove the main unit from the stand and then
move both items separately.
7