Table of Contents
Advertisement
3.6
Alphanumeric Entry Mode
The alphanumeric entry mode is used for setup purposes when the ULTRAKey
interfaces to a MX14 controller or MXSYS04 subrack with a MX128E controller card. The
alphanumeric entry mode is used to setup the MX14 controller or MX128E controller
card and peripheral devices connected to them. A soft key on the ULTRAKey LCD
display can be programmed to access the alphanumeric entry mode. Refer to
paragraph 3.5.5, step 2, to assign a menu action to a soft key. Select the Alphanumeric
Entry menu from the available menu listing.
To activate the alphanumeric entry mode,
press the soft key on the LCD display that is
assigned to the menu. When this menu is
activated, the LCD screen displays the
available alphanumeric characters.
Either jog on the ULTRAKey can be used to
scroll through the available characters.
Press any alphanumeric soft key to send its
associated key code to the MX-14 controller.
In addition, while in this mode, the
ULTRAKey accepts alphanumeric entries
from the numeric keypad on the ULTRAKey
or from an AT keyboard connected to the
ULTRAKey. All entries are sent to the
MX-14 controller.
Refer to Appendix A for the alphanumeric mode key codes.
518750-2960
Rev. F
51
HEMU001007
10/15/04
Advertisement
Table of Contents
