Table of Contents
Advertisement
3.5 CONFIG MODE, CONTINUED
In the status box, the Menu name where the soft key resides is displayed and the
location of the soft key within the menu is displayed
a. The button size can be one, two, or three button widths (providing there is blank
b. The text displayed on the menu for the soft key is programmable. There can be
c. The button action can be one or more MAX key commands (up to 10) and/or a
518750-2960
Rev. F
space next to the soft key on the display). The screen only displays the possible
size(s) for the space. To select a button size, press the desired button size on
the screen.
two lines of text (Top Text and/or Bottom Text). The text is centered on the
button horizontally and vertically.
NOTE: If the text is wider than the key, the text will be truncated.
only one line of text, it is centered vertically on the key.
1)
To enter the top line of text, press the Top Text soft key.
2)
Enter the desired name for the soft key by pressing the character soft keys
on the display. Use the soft up and down arrow keys or the jogs to scroll
through the keyboard for more characters. An AT-keyboard can also be
used or numbers can also be entered using the numeric keypad on the
ULTRAKey.
3)
Press the soft Enter key to save the text
4)
To enter the bottom line of text, press the Bottom Text soft key.
5)
Perform steps 2 and 3 for the Bottom Text.
Menu command.
1)
To program one or
more (up to 10)
keystroke commands,
press the MAX Key soft
key. The first key
command, step #1, is
displayed.
NOTE: The same
procedures are used to
program a hard key or
to edit the configuration
of a hard key.
35
If there is
HEMU001007
10/15/04
Advertisement
Table of Contents
