Honeywell HEGSA002 User Manual User Manual page 59

3.5 CONFIG MODE, CONTINUED
2. Press the Upload Download soft key in the CONFIGURATION menu on the
ULTRAKey.
3. Run the file transfer software on your PC. The file transfer software is located on the
3-1/2" floppy disk in the zip lock bag provided with the unit. The file name is
filexfer.exe.
NOTE: The software can be run from the floppy disk or the files can be copied to
your hard drive and run from the hard drive. If you chose to copy the files to your
hard drive, the file filexfer.exe can be copied to the disk and directory of your choice.
The filexfer.ini file must be copied to your Windows directory (Windows 95/98) or
your Winnt directory (WindowsNT).
4. Double click on filexfer.exe. The following window opens.
518750-2960
Rev. F
45 HEMU001007
10/15/04