Table of Contents
Advertisement
1.1
PRODUCT DESCRIPTION
The ULTRAKey is an operator interface device that connects to the MAX-1000 MXAT200
controller. The ULTRAKey is a user-friendly touch screen interface for controlling
cameras, monitors, switchers, VCRs, etc. The interface has the capability of providing a
descriptive touch screen soft key for each camera configured in the system. The
ULTRAKey is interchangeable with a HEGS5300 (RD530) keyboard.
1.2
HARDWARE FEATURES
The ULTRAKey uses a 1/4 VGA LCD display that provides soft touch descriptive keys.
Soft keys are displayed in menus on the LCD screen. The menus are accessible either
from other soft keys or by pressing a hard key (mechanical key) on the keyboard. Status
messages from the MAX-1000 controller are displayed in a message box at the top of
the LCD display.
A joystick is provided for the pan, tilt, and zoom control of PTZ cameras. The joystick
resolution can be set for high (26 increments) or low (5 increments) using the touch
screen hardware configuration menu.
Two jog/shuttle controls are also provided. The response to the jog/shuttles is defined
in the SETMAX program.
518750-2960
Rev. F
SECTION 1:
INTRODUCTION
Figure 1: Front View
1
HEMU001007
10/15/04
Advertisement
Table of Contents
