Honeywell HEGSA002 User Manual User Manual page 57

3.5 CONFIG MODE, CONTINUED
8. Left click on File or press Alt+F on the PC keyboard. Left click on File Transfer.
There are two files that must be downloaded; the operating system and the
application software. The two files are:
Operating System = rom.vxWorks.bin
Application Software = rom.appl.bin
Download one file at a time. Left click on the file to select it. The file is selected
when it is highlighted as shown below. The file being downloaded is displayed in
the Path: field
9. Press the Upload/Download soft key in the CONFIGURATION MENU on the
ULTRAKey. The SEND and RECEIVE Menu is displayed.
a. Press the Receive Any File soft key. The message, "You have chosen to receive
518750-2960
Rev. F
WARNING: Both Files Must Be Downloaded Prior To
Removing Power To The Controller. The Controller
Will Not Be Functional If Power Is Removed Before
Both Files Are Downloaded.
data", is displayed. Press YES to continue receiving data. Press NO to end the
operation.
NOTE: You have approximately one (1) minute to begin downloading a file after
pressing YES before the unit times out and returns to the Send & Receive Menu.
43 HEMU001007
10/15/04