Table of Contents
Advertisement
3.5 CONFIG MODE, CONTINUED
d. To remove a button from a menu, press the Delete Button soft key.
e. If you want to copy this button and insert it into another menu, press the Copy
f.
2. Press alt+home soft key to return to the previous menu.
518750-2960
Rev. F
b.
To add a new menu to the listing, press the New Menu soft key.
i)
Enter the name of the new menu. Use the soft up and down
arrow keys or the jogs to view more characters. You can also
use an AT-keyboard for entering characters or the numeric
keypad on the ULTRAKey for entering numbers. Use the Bksp
and Clear key for keystroke errors.
ii) Press the Enter soft key. A message, "Menu Selection
Changed" is displayed. The new Menu name appears in the
listing.
c.
To delete a menu from the listing, highlight the menu and press the
Del Menu soft key. There are two menus, the StartupMenu and the
AlphanumericEntry menu that cannot be deleted. Also, if the menu
is assigned to a soft key, the following message is displayed.
"ERROR: Unable to delete menu. Menu being used." Press OK.
d.
To edit a menu's name, press the Edit Name soft key, enter the new
name and press OK. Use the Bksp to delete letters from the end of
the name or use the Clear key to delete all letters. Note: The
Alphanumeric Entry and StartupMenu menus cannot be renamed or
edited. The new name appears in the listing.
e.
To delete a menu action from a soft key, press the Delete Action soft
key.
A message confirming the deletion is displayed. Press YES
to delete the menu action; press NO to cancel the deletion.
f.
Press the OK soft key to save programming or press the Cancel soft
key to exit menu without saving.
NOTE: Changes made with the Edit Name, New Menu, and Del
Menu soft keys do not revert back if cancel is pressed.
3.
Press the OK soft key to save programming.
Press the Cancel soft key to exit programming without saving.
Button soft key. This copies the button to a holding file (much like a Windows
clipboard). You can then paste the button into another menu.
To save the programming for the soft key, press the OK soft key.
38
HEMU001007
10/15/04
Advertisement
Table of Contents
