Honeywell HEGSA002 User Manual User Manual page 37

3.5 CONFIG MODE, CONTINUED
Keyboard Addr = 1 – press this soft key to
change the address of the ULTRAKey. Each
keyboard in the system must have a unique
address between 1 and 99 corresponding to
the keyboard address as defined in the
SETMAX program.
Enter the desired number using the numeric
soft keys or the numeric keypad, then press
the Enter soft key. Use the Bkspc soft key to
delete a number(s) entered in error. Press the
Quit soft key to exit the keyboard address
menu without changing the address.
After entering a new keyboard address, press the SAVE soft key in the Hardware Config
menu. A message, "Save to Flash?" is displayed. Press YES to save the new keyboard
address; press NO to exit without saving the new address to flash memory.
Port Settings – press this soft key to define
the communication settings for COM1, COM2,
COM3, or Ethernet.
Press the desired soft key (COM1, COM2,
COM3, or Ethernet) to define the
communication settings.
NOTE: The communication settings must be
the same as the equipment connected to the
port.
Example: Press COM 1
Pressing the soft key toggles between the
available options. Refer to Tables 1 and 2 for
the available and default port settings
518750-2960
Rev. F
23 HEMU001007
10/15/04