Appendix A. Cable Drawings; Introduction; Control Interface Cables - Comtech EF Data CRS-180 Installation And Operation Manual

A.1

Introduction

This appendix contains drawings of cables used with the CRS‐180 70/140 MHz IF 1:1 Redundancy Switch. These cables are broken into two
categories: Control Interface Cables and IF / Data Interface Cables. Each section provides illustrations of the cables' technical specifications;
additionally, the tables cross‐reference each cable to the applicable modem‐specific cabling figures provided in
CONNECTIONS
.
A.2

Control Interface Cables

App. A
CEFD CABLE P/N
FIG
A-1 CA/WR9378-4
A-2 CA/WR12135-1
A-3 CA/WR13011-4
A-4 CA-0000187

Appendix A. CABLE DRAWINGS

DESCRIPTION
Universal Cable, Control DB-9M DB-9M, 4'
Adapter Cable, Control (RoHS), DB-15F
Optional Adapter Cable, 'Y' Splitter Control DB-15F
(Alternate to CA/WR12135-1)
Optional Cable, Control (Non-muting) DB-15F
(Alternate to CA/WR12135-1)
USED WITH CRS-180
CDM-625
CDM-750
CDM-570
CDM-700
DB-9M, 6' CDM-710
CDM-710G
CDM-700
DB-9M (4'), DB-9M (6")
CDM-710
CDM-710G
CDM-700
DB-9M, 6'
CDM-710
CDM-710G
A-1
Chapter 4. CABLES AND
REF Ch. 4
USED FOR (TYPE)
FIG
4-1
1:1 Control 4-15
4-20
4-27
1:1 Control 4-33
4-38
4-27
1:1 Control, Summary Fault
4-33
Relay
4-38
4-27
1:1 Control (Non-mute Tx IF) 4-33
4-38