Introduction; Figure 1-1. Crs-180 70/140 Mhz If 1:1 Redundancy Switch - Comtech EF Data CRS-180 Installation And Operation Manual

70/140 mhz if 1:1 redundancy switch
Hide thumbs Also See for CRS-180:
Table of Contents

Advertisement

Chapter 1. INTRODUCTION
1.1
Overview
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Figure 1-1. CRS-180 70/140 MHz IF 1:1 Redundancy Switch

The  CRS‐180  70/140  MHz  IF  1:1  Redundancy  Switch  module,  shown  in  Figure  1‐1,  is  a  50Ω, 
70/140  MHz  Tx‐Rx  IF  signal  switch  designed  for  use  with  IF  satellite  modems  in  a  1:1 
configuration.  
 
The Tx side switches the Online unit onto the transmit coaxial cable. The Rx side of the switch 
uses power dividers to provide both demodulators with the same IF signal from the LNB, thus 
reducing switching time. 
 
The CRS‐180 is designed to support 1:1 redundancy for Comtech EF Data CDM‐625, CDM‐750, 
CDM‐570, CDM‐700, CDM‐710, and CDM‐710G modems. Table 1‐1 summarizes the CRS‐180 1:1 
IF  Switch  applications,  including  requirements  for  supporting  data  switching  hardware  and 
software. 
 
1–1

Advertisement

Table of Contents
loading

Table of Contents