10/100 Ethernet Interface Examples; Managed Switch Mode (With/Without Ip Packet Processor) - Comtech EF Data CRS-180 Installation And Operation Manual

CRS-180 70/140 MHz IF 1:1 Redundancy Switch
Cables and Connections
4.2.4.9

10/100 Ethernet Interface Examples

4.2.4.9.1

Managed Switch Mode (with/without IP Packet Processor)

Figure 4‐12 shows a block diagram and cabling example of a CDM‐625 1:1 modem configuration
using the 10/100 Ethernet Interface in Managed Switch (Ethernet Bridge) Mode. Direct connection
is made via one to four RJ‐45 ports using user‐provided Ethernet cables and Layer 2 switches, so
no cables or kit is required. The cabling example depicts all four Ethernet ports used.
CDM-625 Block Diagram: 10/100 Ethernet Interface – Managed Switch Mode
Figure 4-12. CDM-625 10/100 Ethernet 1:1 Example – Managed Switch Mode
4–12
Revision 8
MN/CRS180.IOM