Modem-To-Switch Control Interface Connection; Figure 4-1. Cdm-625 Modem-To-Switch Control Connections - Comtech EF Data CRS-180 Installation And Operation Manual

CRS-180 70/140 MHz IF 1:1 Redundancy Switch
Cables and Connections
4.2.2

Modem-to-Switch Control Interface Connection

When connecting the Control cable between the CRS‐180 and the modems, ensure
that screw locks on the 'D' type connectors are securely fastened. This will prevent
the accidental unmating of the cable, particularly when a standby unit is being
removed or replaced.
CEFD Part No.
CA/WR9378-4

Figure 4-1. CDM-625 Modem-to-Switch Control Connections

Qty Description
2 Control Cable – Universal, DB-9M, 4'
4–4
Revision 8
MN/CRS180.IOM