Server rack installation
Next steps
If the server is being installed in a cabinet, reattach the doors, following the cabinet
manufacturer's instructions.
Powering up the server
Once the server is installed in the rack, you want to power it up to make sure it is working.
Once determined, power it down again before inserting any software CD/DVD into the CD/
DVD drive.
1. Plug one end of the power cord into the back of the power supply and the other
2. Press the power button on the front of the server.
Next steps
Refer to specific product documentation for information on installing the operating system
and software
Adding a second power supply
You can add a second power supply without powering down the server first.
24
Installing the Avaya S8510 Server Family and Its Components
end into a UPS or nonswitched outlet.
The green power button lights and the LCD displays Avaya when the power is on.
May 2008