Inserting And Removing Diskettes - Toshiba T2150CD Series Manual

Finally, you will be requested to select a printer port. After moving the highlight bar to
the printer port and pressing Enter, Windows installation will be completed. On
subsequent start-ups, the computer will initially display the Windows environment.
NOTE
The AC IN LED and Power/Speed icons should glow when
power is turned on.

Inserting and Removing Diskettes

The external 3 1/2" diskette drive provides a convenient means of transferring and storing
data. To insert a 3 1/2" diskette into the T2150CD series computer:
1. Hold a diskette with the insertion-arrow side up (hub side down). The metal protective
cover should point toward the diskette drive.
2. Put the diskette into the insertion slot. When it is nearly seated, you should feel a slight
resistance. Gently push the diskette until it pops into place.
3. When the diskette is firmly in place, the diskette eject button pops out. If you insert a
diskette upside down or backwards, it will not completely enter the drive or it will keep
popping out each time you insert it.
Never force a diskette in or out of the drive. If it doesn't easily go in, take the diskette
out and make sure you are inserting it properly. If the diskette is stuck inside the drive,
contact your dealer.
4. Remove a diskette by pressing the diskette eject button. The diskette comes partially out
for easy removal. Store the diskette in its storage box.
Figure 3-7 Inserting a diskette