International Keyboards; Security Lock - Toshiba T2150CD Series Manual

Use the PS/2 keyboard port on the computer or optional port replicator to connect a PS/2
keyboard. See the Port replicator section in this chapter for directions on connecting the
port replicator. To connect a PS/2 keyboard:
1. Turn the computer off.
2. Plug the PS/2 keyboard connector into the PS/2 keyboard port on the computer or port
replicator.
3. Before turning on the computer, connect the keyboard to the port replicator, pressing
gently to assure a firm connection. If you connect the keyboard while the computer is on,
you will have to reboot for the computer to recognize the keyboard connection.
NOTE
When an external keyboard is connected, the internal keyboard is
disabled.
To disconnect the keyboard, turn off the computer and pull out the keyboard connector.

International Keyboards

Eight international keyboards are available for the T2150CD series computers. The 82-key
U.S. English keyboard must be replaced with an 84-key keyboard in order to fit the
international key cap sets. If you have the 84-key U.K. English keyboard, only new key caps
are necessary.
To replace a key cap, grip the cap with the supplied key cap remover and pull straight up as
shown in the following figure. Next, squarely place the new key cap on the proper connector
and firmly press it until the cap snaps into place.
Appendix C shows the international keyboard layouts with the new key caps in place.

Security Lock

Figure 12-15 Replacing a key cap