Accessing System Setup - Toshiba T2150CD Series Manual

This chapter explains how to use TSETUP and MaxTime options to configure the T2150CD
series computer. It also describes how to set the power on and instant security password to
prevent others from accessing your data.
When you configure the computer with TSETUP, the computer stores your selected values in
memory that is backed up by the internal battery powered Real Time Clock (RTC). Each
time you start the computer, the configuration remains the same as that of the last setting.
NOTE
If the RTC battery fully discharges, configuration data is lost. A
checksum error is displayed when you start the computer and the
system configuration returns to factory preset values.
SYSTEM SETUP of TSETUP
SYSTEM SETUP is an option of the executable file TSETUP.EXE, which is stored in the
DOS subdirectory on your hard disk.

Accessing SYSTEM SETUP

At the MS-DOS prompt, type TSETUP and press Enter.
1.
TSETUP displays the SYSTEM SETUP screen.
NOTES
1. The T2150CDS comes with standard 4096KB of memory. The
MEMORY total
2. The
Panel Power On/Off
Setup and Password Security
Figure 11-1 The system setup screen
item displays the actual memory installed.
item appears only when the
Chapter 11