Table of Contents
Advertisement
Connecting the AC Adapter
To supply power to the computer, connect the AC adapter as described below.
1.
Attach the power cord to the AC adapter.
2.
Plug in the AC adapter cable.
Disconnecting the Port Replicator
To disconnect the port replicator, follow the steps below.
1.
Turn off the computer.
2.
Lift up the port replicator's connecting lever.
3.
Lift off the computer.
4.
Pull out the computer's interface cover and close it.
Parallel Printer
You can connect any standard Centronics-compatible parallel printer to your computer. All
you need is an IBM PC parallel printer cable. Your dealer can supply one or you can
purchase one at most computer stores.
Figure 12-12 Completing the connection
Figure 12-13 Connecting the AC adapter
Figure 12-14 Lifting up the connecting lever
Advertisement
Table of Contents
