Security lock slot
Right Side
Refer to Figure 12-8 for the location of items on the port replicator's right side.
External diskette drive
Connecting the Port Replicator
The port replicator is designed to assure a secure connection by a few simple operations.
To connect the port replicator, follow the steps below.
PS/2 keyboard
PS/2 mouse
Ground
Headphone jack
Volume control
Use this port to connect a PS/2 keyboard.
Use this port to connect a PS/2 compatible pointing
device.
The ground screw is used to attach a grounding cable
to protect the computer against a telephone line power
surge when a card modem is installed.
This slot lets you attach a security cable to the port
replicator to deter theft. Attach one end of the cable
to the port replicator and the other end to a desk or
other large object.
An external 3 1/2" diskette drive accommodates both
1.44MB double-sided, high-density, double-track
(2HD) and 720KB double-sided, double-density,
double-track (2DD) disks. The computer's external
diskette drive port can also be accessed, but only one
of the ports can be used.
A standard 3.5 mm mini line-out jack enables
connection of a stereo headphone (80 ohm minimum)
or other device for audio output. When you connect
headphones, the internal speaker is automatically
disabled.
Use this dial to adjust the headphone volume.