Table of Contents
Advertisement
1.
Turn off the computer.
2.
Disconnect any peripheral devices connected to the computer.
3.
Lift up the connecting lever on top of the port replicator.
4.
Seat the computer onto the port replicator's guide pins. Be sure holes on each back
corner of the computer's underside fit onto the pins.
Figure 12-11 Positioning the computer on the port replicator
5.
Press the port replicator's connecting lever down fully to its original position to complete
the connection.
NOTE
When you close the lever, the cover to the computer's port
replicator port automatically opens, the port replicator's
connector engages with the computer's port replicator port, and
metal latches on the port replicator engage notches on the bottom
of the computer to hold the connection securely.
Figure 12-10 Lifting up the connecting lever
Advertisement
Table of Contents
