Table of Contents
Advertisement
Connecting 3 1/2" External Diskette Drive
To connect the drive, follow the steps below and refer to Figures 3-3 and 3-4.
1.
Plug the connecting cable's larger connector into the 3 1/2" external diskette drive's
socket. Press the latches on either side of the connector when you plug in the connector.
NOTE
The connectors are designed so they cannot be misconnected.
Figure 3-3 Connecting the cable to the diskette drive
2.
Pull down the cover to the computer's 3 1/2" diskette drive port.
3.
Press the latches on either side of the smaller connector and plug it into the diskette drive
port.
Figure 3-4 Connecting the cable to the computer
NOTE
Advertisement
Table of Contents
