Turning On The Power - Toshiba T2150CD Series Manual

Turning on the Power

To start your computer, follow the steps below:
1. Make sure the CD ROM drive and external 3 1/2" diskette drive are empty. If a
diskette is in the drive, press the eject button and remove the disk.
2. Press and hold the computer's power button for two or three seconds.
3. When you turn on the power for the first time, the following message will be displayed:
CAUTION ! !
MS-DOS 6.22 and Microsoft Windows for Workgroups 3.11 are
preinstalled on your hard disk.
The first thing you should do with your computer is make backup
diskettes of the MS-DOS 6.22 and Microsoft Windows for Workgroups
software installed on your hard disk. It is important that you
make backup diskettes before you begin loading application
software. Should any MS-DOS or Microsoft Windows for Workgroups
files be damaged, you will need to restore them from backup
diskettes. For making backup diskettes, you must make Toshiba
Companion Utility diskette. Refer to your documentation for
procedures on making Toshiba Companion Utility diskette and backup
diskettes of files installed on your hard disk.
Do you need to display the above message whenever you boot (Y/N) ?
If you prefer to keep this display, press Y. If you do not want the message displayed,
press N.
After you press Y or N, Windows will run and you will be requested to enter your name,
your company's name and product.
Next, you will be requested to select a printer model. Use the arrow keys to move the
highlight bar to the model of your printer and press Enter.
Figure 3-6 Turning on the power